This 3-in-1 power filter performs three functions at the same time: water filtration, water circulation and aeration. Compact and versatile units are ready to use - no additional tubing or circulation pump required. Install in vertical or horizontal position right in your aquarium or sump.
Feature:
- Voltage: 110 - 120 V @ 60 Hz
- Length of power cord: 4.5 feet
|
Flow rate(GPH)
|
Fits Tank Size Up To
|
Filter Size(LxWXH)
|
Filter Power(W)
|
|
80 |
20 |
1.75" x 1.25" x 5.25" |
2 |
|
90 |
25 |
1.75" x 1.5" x 4.75" |
4.5 |
|
160 |
40 |
2" x 1.75" x 5.25" |
8 |
|
210 |
50 |
2.36" x 2.00" x 6.38" |
7 |
INCLUDES:
(1) Power filter
(1) Spray bar
(1) Aeration connector (Venturi)
(1) Aeration tube
(1) Water outlet
Tips for Operation and Maintenance:
• Spray Mode:
This is the most common application. The installation is very simple for this “plug-and-play” filter. Just attach the spray bar to the filter body, place the filter body under water then it will work.
• Aeration Mode:
The black “T” shaped connector is the aeration connector (Venturi). You can use it to replace the spray bar. Connect the aeration tube to the branch and leave another end in air. Air will be pulled into the connector, mixed and discharged out with water to increase oxygen level.
• Outlet Mode:
The short black straight pipe is water outlet. It is used to connect external water tube (the water tube is not included) to the filter.
• This filter saves your maintenance cost by not requiring replacement cartridge. For routine cleaning, just take out the black bio-sponge and wash it with aquarium water every a couple days to two weeks, depending on the load of your tank. This bio-sponge conducts both mechanical and biological filtration. So the longer you use it, the better.
• To clean cloudy water or remove chemical, you can place pallets activated carbon into the box inside of the filter.
You might also like
